fbpx

F2 Flat White

Note:

  • Surface drying: 15 minutes(after each last coat of each color, wait for at least 15 minutes to dry before applying the next color) or longer depending on weather conditions
  • Do not spray paint during raining day or night time.
  • Do not spray paint directly under the sun.
  • Best to install fairing after 3-7 day curing time
  • Polish or wax must be 1 – 2 week after finish spray painted.

F2 Flat White Standard color spray paint process

Step 1: Preparation

Sanding with sandpaper P200-P400 Wetly (Sanding remove old clear coat, best if remove all the old paint), then clean the surface and sundry.

Step 2: Primer

  • 2K04 Surfacer : Spray 2-3 thin layers, each layer interval 5-8 minutes. Air-dry for 2 hour before next step.
  • UCH210 Surfacer : spray 2-3 thin layers, each layer interval is 3-5 minutes. Air-dry for 30 minutes before next step.

Step 3: Primer Smoothness

If 2K04 Surfacer is used, after the primer dried, use P400 –P1000 sandpaper to sand smooth wetly, and then clean the surface and sundry.
(tips: while sanding the sound of sanding got lower when it is become finer)

Step 4: Color coat

Spray 2-3 thin layers of F2 Flat White, 3-5 minutes interval (or longer depending on weather conditions)

Step 5: Final Matte Coat

  • 128A Flat Clear : Spray 3-4 thin layers, each layer is 3-5 minutes interval (the last layer is sprayed slowly and evenly to make the paint flatten and glossy), do not drying or spray painting directly under the sun.
  • 2K01A Flat Clear : Spray 3-4 thin layers, each layer is 5-8 minutes interval (each layer interval must not longer than 10 minute) (the last layer is sprayed slowly and evenly to make the paint layer flatten and glossy), do not drying or spray painting directly under the sun.

Reviews

There are no reviews yet.

Be the first to review “F2 Flat White”

Your email address will not be published. Required fields are marked *

Subscribe us